home *** CD-ROM | disk | FTP | other *** search
/ Collection of Tools & Utilities / Collection of Tools and Utilities.iso / system / pgrap207.zip / PROGRAP.HLP < prev    next >
Text File  |  1991-09-19  |  19KB  |  415 lines

  1. *MENU HELP
  2. Select a menu item by moving the menubar on it and depressing the RETURN key.
  3. You may also select a menu item by typing the menu's highlighted letter.
  4. The key combination ALT-X will terminate ProGRAP immediately. ALT-X can not
  5. be used while one of the tools is running, this to prevent file damage.
  6. ALT-Z will suspend ProGRAP and return to the DOS-prompt.  To return to
  7. ProGRAP, type EXIT.
  8.  
  9. Add the following line to your AUTOEXEC.BAT :
  10.  
  11. set prograp=drive:\path
  12.  
  13. Replace drive:\path with the path where ProGRAP should look for its help and
  14. config file.
  15. If ProGRAP does not find the environment variable prograp, then it starts
  16. searching in the directories specified in the PATH instruction of your
  17. AUTOEXEC.BAT file. If not found, the root of drive c: is assumed.
  18. ProGRAP can start running without the files PROGRAP.HLP and PROGRAP.CFG,
  19. but not without the files PROGRAP.MSG and PROGRAP.SCN.
  20.  
  21. Variables found in tthe PROGRAP.CFG file (Default setup) :
  22.  
  23. ProGRAP v2.00 setup file  (C) 1990-1991 By Karl G.L. Moortgat
  24. LINELENGTH=255               Max. linelength         1-512
  25. TAB_WIDTH=4                  Max. Tab width          1- 80
  26. CASEFLAG=0                   Case sensitive search   0-  1 (0=ON, 1=OFF)
  27. EXTENTIONFLAG=0              Use extention           0-  1   "      "
  28. DIRFLAG=0                    Use directory           0-  1   "      "
  29. SCRFILPRT=1                  Screen/File/Printer     1-  3 (1=S, 2=F, 3=P)
  30. DATE_TIME=0                  Preserve time and date  0-  1 (0=YES, 1=NO)
  31. IMMSELFLAG=0                 Automatic file select   0-  1   "      "
  32. EMBSPACEFLAG=0               Replace spaces (''/"")  0-  1   "      "
  33. LINESPERPAGE=66              Lines per page         30-100  
  34. TOPBOTTOMMARGIN=2            Top and bottom margin   0- 10
  35. SPACEBETWEENLINES=0          Inter line spacing      0- 10
  36. LEFTMARGIN=0                 Left margin             0- 40
  37. RIGHTMARGIN=80               Right margin           40-192
  38. PAGEHEADER=0                 Print pageheader        0-  5 (Choice list)
  39. PAGEFOOTER=0                 Print pagefooter        0-  1 (0=NO, 1=YES)
  40. PAGENUMBERS=1                Print pagenumbers       0-  1   "      "
  41. LINENUMBERS=0                Print linenumbers       0-  1   "      "
  42. STOPEACHPAGE=0               Pause each printed page 0-  1   "      "
  43. FORMATPRINT=1                Use above print options 0-  1   "      "
  44. PRINTERPORT=0                LPT1/2 COM1/2           0-  3 (Choice list)
  45. FILE_SPEC=*.*                File select spec
  46. OUTPUT_FILE=C:\PROGRAP.PRT   ProGRAP's output file
  47. WILD_CHARACTER=.             Search wild character
  48. EXTENTION=TMP                Alternate file extention (See flag)
  49. DIRECTORY=C:\                Alternate output directory (See flag)
  50.                              ────────────┬───────────────────────────────
  51.                                          │
  52.                                          └─ Meaning of variables
  53.  
  54. The values are adjusted when out of range (Default values are used).  The
  55. order in which the variables appear is not important.  Nor is the presence
  56. of each variable.  Upper- and lowercase may both be used.
  57.  
  58.  
  59. Key usage :
  60. ═══════════
  61.  
  62. HELP
  63. ────
  64. Alt-F1       : Zoom and unzoom help window.
  65.  
  66. MENU
  67. ────
  68. CTRL + HOME  : First item.
  69. CTRL + END   : Last item.
  70. LEFT         : Previous item.
  71. RIGHT        : Next item.
  72. UP           : Move up one item.
  73. DOWN         : Move down one item.
  74. ESC          : Exit to higher-level menu.
  75. ENTER        : Select current highlighted item.
  76. LETTER       : Move to item with same selection character and select.
  77.  
  78. CHOICE LIST
  79. ───────────
  80. UP           : Move cursor up one row.
  81. DOWN         : Move cursor down one row.
  82. PGUP         : Move cursor up one page.
  83. PGDN         : Move cursor down one page.
  84. HOME         : Move cursor to first row in window or first row in list.
  85. END          : Move cursor to last row in window or last row in list.
  86. ESC          : QUIT choice list.
  87. ENTER        : Select.
  88.  
  89. FORM
  90. ────
  91. F2           : Activate choice list if present.
  92. F6           : Clear field.
  93. Shft-F3      : Undo.
  94. Shft-F6      : Clear from cursor to end of field.
  95. F7           : Previous item on the form.
  96. F8           : Next item on the form.
  97. F10          : Exit form.
  98. END          : Move cursor to end of the field.
  99. HOME         : Move cursor to beginning of the field.
  100. CTRL + HOME  : First item of the form.
  101. CTRL + END   : Last item of the form.
  102. ENTER        : Move to next item on the form.
  103. TAB          : Next item.
  104. Shft-TAB     : Previous item.
  105. SPACE        : Toggle between field values.
  106.  
  107. Shift-F1 calls an alternate help function which gives you help about which
  108. keys to use at that moment.
  109.  
  110. The top menuline shows besides the clock the status of the keyboard.
  111. It shows wheather num-lock, caps-lock or scroll-lock is turned on.
  112. Scroll-lock has a special function.  When a tool is started and scroll-lock
  113. is ON,  the tool will produce 48 lines of output and will then be halted.
  114. During this pause you can scroll thru these 48 lines using the cursor keys.
  115. To continue,  hit the spacebar,  another 48 lines will be buffered.  ESC will
  116. stop the tool.
  117. *SELECT FILES
  118. Select the files which will be used with one of the tools.  Selecting this
  119. option causes the selected file list to be cleared.  The selected file list
  120. remains active after the use of each of the tools.  A file can be viewed
  121. with F3.  Use F2 to change the file search specification.
  122. *VIEW SELECTION
  123. Pop's up a window with all the selected files.  Use the cursor keys, home,
  124. end, page up and down keys to scroll through the list.  The mouse can be
  125. used when a driver is active.
  126. *CHANGE DRIVE
  127. Change the system's current drive.  If it is not possible to change to that
  128. drive,  ProGRAP will switch to drive C:.
  129. *EXIT PROGRAP
  130. Exit from ProGRAP,  and return to the calling program or OS.
  131. *FGREP
  132. Search through the selected files for a given string.  FGREP can search for
  133. three strings at the same time.  If case sensitive search and output to
  134. screen only have been selected,  then FGREP will work fast !  Case insensi-
  135. tive search and sending the result to a file,  slows down FGREP.
  136. *GRAP
  137. Search through the selected files for a given string and replace this string
  138. with the second entered string.  Selecting case insensitive search and output
  139. to file,  slows down GRAP.
  140. *UNTAB
  141. Search through the selected files for tabulations and replace them with
  142. spaces.  The tabulation width can be changed,  select SETUP and from this
  143. list TAB-WIDTH.
  144. *TAB
  145. Replace groups of spaces by tab's.  The tabulation width can be changed,
  146. select SETUP and from this list TAB-WIDTH. It is possibble to prevent spaces
  147. between single or double quotes being replaced by tab's. See SETUP / REPL.
  148. EMBEDED SPACES.
  149. *CASE
  150. Select wheather the search for a string should be case sensitive or not.  Se-
  151. lecting sensitive search speeds up FGREP and GRAP,  but does not allow the
  152. use of wild characters.
  153. *WILDCHAR
  154. Select the wild character to be used in search functions.  This feature is
  155. only available when case insensitive search is used.
  156. *TABWIDTH
  157. Enter the number of spaces that should be used when replacing a tabulation.
  158. *EXTENSION
  159. Enter the extension that should be used when preserving the original files.
  160. For GRAP and UNTAB only.
  161. *DIRECTORY
  162. Enter the path where output files should be placed. For GRAP and UNTAB only.
  163. When this option is active,  the changed files are placed in this directory.
  164. *USE EXTENSION
  165. When this flag is turned on, GRAP and UNTAB will create a file with the ori-
  166. ginal name,  but with the extension defined with the option EXTENSION.
  167. *USE DIRECTORY
  168. When this flag is turned on, GRAP and UNTAB will send their modified files
  169. to this directory leaving the original files unchanged.  This option makes
  170. the use of an alternate extension optional.
  171. *LINELENGTH
  172. Enter the linelength that GRAP and UNTAB should preserve.  When the maximum
  173. linelength is exeeded,  the original line is written to the output file.
  174. *IMMEDIATE
  175. If this option is on,  all files will automaticly be marked when selecting
  176. files.
  177. *VIEW
  178. View ProGRAP's setup.  Shows